Specialty Spillproof Heating Mantles
Model K-1
●
For flasks up to 1000ml.
●
Stepless heat control.
●
Operating temp. up to 750°C.
Model K-2
●
For flasks up to 2000ml.
Three Flask Size In One Mantle
Heating Mantle With Magnetic Stirrers
KM-1
KM-2
Model KM-1/KM-2
●
Steeples heat control up to 650°C
●
Variable speed control up to 1800 RPM
Features:
●
Three in one design accommodates 250, 500 or
1000ml round bottom flasks (K-1, KM-1).
●
Three in one design accommodates 500, 1000 or
2000ml round bottom flasks (K-2, KM-2).
●
Different vessel sizes, spill proof heater.
●
Includes rear bracket for support rod.
●
Stepless heat control up to 750°C (650°C with stirrer)
●
Variable speed control up to 1800rpm (KM-1, KM-2).
●
Heater on light.
●
Element temperature range of ambient to 750°C.
Analog Model Digital Model
Temp. range Capacity
Stirring
Dimensions Weight
Watt
K-1
K-1D
up to 750°C 250-1000ml
-
W12xD17xD18cm 1.2kg 550
K-2
K-2D
up to 750°C 500-2000ml
-
W21xD20xD24cm 1.4kg 750
KM-1
KM-1D
up to 650°C 250-1000ml
up to 1600rpm W16xD17xD23cm 2.3kg 550
KM-2
KM-2D
up to 650°C 500-2000ml
up to 1600rpm W21xD20xD24cm 2.5kg 750
Specifications:
●
Units are designed with a built-in stainless steel
liner that gives electrical & mechanical protection
against spillage & enables easy cleaning
●
Built-in
electronic controller regulates heating element from
ambient to 750
°
C, 2 ranges: low & high
●
Durable
housing is chemically resistant
●
Accept a large
range of flasks
●
For maximum operator protection,
models are grounded should spillage or flask
breakage occur
●
All models include support rod
holder at the back.
E-Series, Multi Position Round Top Extraction Heater
The Multi Heating Apparatus offers such versatility that is
suitable for many laboratory purposes: extractions,
distillations, digestions, evaporation etc. The 6 separate
heat controls allow the heaters to be used for several
different projects or multiple runs of the same project. The
Multi Heating Apparatus in conjunction with inter-
changeable top mould for round bottom flasks - solves the
most varied heating problems.
E-6
Model E-6
Six individual heat controls with
pilot lights
●
Built-in temperature regulator
●
For 6 places,
220 Volt (on request 115 V), 2700 Watts (6x450 W)
●
Approximate temp.: 40 - 450°C
●
Hotplate top 85 mm. dia.
●
Dimensions (WxHxD): 80x17x20 cm
●
Accessories:
Optional: 6 interchangeable aluminum top moulds for
round bottom flasks up to 100 ml or 250 to 500ml
(Kjeldahl flasks 500-800 ml)
●
4 support rods 800x12 mm.
with 4 clamps.
Model E-4
as described above, but for 4 places 220Volts
1800Watts (4x450W). DIM. (WxHxD): 60x17x20 cm.
●
Optional: Aluminium top mould for round bottom
flasks up to 250ml/500ml for extraction apparatus
soxhlet.
●
Digital temperature control.
KM-1D
Optional: Digital Temp. control
Heating Mantle with
Magnetic Stirrer
K-1
K-2
SPILLPROOF HEATING MANTLES
15
