MS
®
ReusableSyringe FilterHolders
Introduction
TheRe-usableSyringeFilter holders areunaffected by chemicals and contains no trace elementswhich couldbe released into the
liquid being filtered. It is therefore extremelywell suited for particle removal for sample preparation.
PDF [ 6Page / 1.004kb]
Feature
●
CompatibilityChemical resistance as for polycarbonate and silicone
●
Dead volume Less than0.3ml after bubble point
●
Filter Requires 13, 25, 50mm diametermembrane filter
●
25mm diameter Filtration area 3 cm2
●
Flow rates• Typical values for water at 1 bar (100 kPa), 70ml/minwith 0.2μm, 110ml/minwith 0.45μm pore size filters
●
Materials• polypropylene top and bottom part. Silicone gasket (20.5 x 26.5mm, replacement for apack of 10)
●
Pressure limit•Max. operating pressure, 7 bar (700 kPa)
●
SterilisationBy autoclaving (121°C)
Application
●
Gas particulateand bacteria filtration and then inspect them
●
Oil particulateandbacteria filtration and then inspect them
●
Alcohol particulate and bacteria filtration and then inspect them
●
Other solvent particulate and bacteria filtration and then inspect them
Order Information
