Products Used for GC Setup
GC Installation Kit
This kit contains the necessary tubing and fittings to add an
additional GC to your lab bench. Also included in the kit are
four l/g” tees, soGC gases like hydrogen, helium, nitrogen,
and air can be routed to the new inlet or detectorfrom the
existing gas lines. Additional parts, such as purifiers or
regulators, may be ordered separately to customize the GC
installation to your labs specifications.
Kit includes: one tubing cutter, one 1/8" x 1/4" reamer, one 7/16"”
wrench, one 1/2"wrench, four 1/8" brass tees, ten 1/8" brass
nuts, ten brass front and back ferrules, and 50’ of pre-cleaned
1/8" copper tubing.
GC InstallationKit: cat.# 21325
MLE Tool Kit
This kit contains all the tools necessary for installing and
maintaining your capillary columns.
l
Three stainless steel brushes
(3/16", 1/4', 3/8")
l
Stainless steel toothbrush
l
Glass wool puller/inserter
The MLE Tool Kit Includes:
l
Rubber-tipped Slide-Lok tweezers
l
15cm compact steel ruler
l
Sapphire scribe
l
Pocket magnifier
l
Pin visewith three drills (0.41,0.5,0.8mm)
l
Four-inch tapered needle file
l
Six stainless steel jet reamers (0.25-0.65mm)
l
Five self-adhesive capillary column labels
l
Septum puller
l
Three nylon brushes (l/8”, 3/16”, 1/4")
l
Pipe cleaner (one-foot)
’
1/4-3/16"wrench
l
Capillary column installation guide
l
Chromatography Essentials Wall Chart
l
One-meter of high temperature string(400C)
MLE Tool
Kit:
cat.# 20118
Electronic FlowCalibrator
l
NIST traceable calibration
l
Displays flow, linear velocity, or split ratio
l
Measures 0.1 to 500ml/min.
l
Works with hydrogen, helium, nitrogen, air, or argon/
methane
l
Battery operated for easy portability
TheElectronic FlowCalibrator can be used tomeasure any of
the common gases usedwithGCs. Each flowmeter is
calibrated using NIST traceable standards. Flows from 0.1 to
500cc/min. can be accuratelymeasured and easily switched
between gases. The Electronic Flow Calibrator measures
mass flow that is independent of changes in ambient tempera-
ture and pressure which can affect soap film or acoustic
sensor meters.
Electronic FlowCalibrator:
cat.#
21606
13
13
1998
